Power-Kleen chemical detergents for
aqueous parts cleaning are specially formulated for use in all
types of StingRay Industrial Parts Washers. They provide high efficiency and very effective industrial
part cleaning results. Power-Kleen chemicals are 100% active and highly concentrated. There are no fillers resulting in highly active detergents for extended cleaning time before re-charge and clean-out. Many detergent suppliers "fill" their aqueous chemicals with non-active low cost ingredients that do nothing except add volume to the chemicals. These fillers end up as sludge in the bottom of your
industrial part washer. The result is additional waste to haul off resulting in higher disposal costs. With Power-Kleen chemical you get 100% active
aqueous washing detergent so that 100% of the chemical goes to work cleaning your parts. 100% active detergent means lower cleaning costs and lower disposal costs.
Power Kleen detergents are specifically blended with defoamers that float on the surface to prevent foaming. Power-Kleen
washer cleaning soaps and detergents are safe for a wide variety of common part materials including both ferrous and non-ferrous metals and plastics. Our Power-Kleen
detergents have built-in rust inhibitors that protect your parts washer cabinet from harmful corrosion that may be caused with other chemicals and detergents. There is even a Power Kleen rust inhibitor compatible with all Power-Kleen detergents, soaps and chemicals that is designed for short-term rust prevention. The corrosion inhibitor is metered in to your washing machine's rinse water to protect your cleaned parts from flash rust.
Our Service Staffs' experience with hundreds of
parts cleaning applications similar to yours will guide you in selecting the best Power-Kleen detergent and chemicals for your StingRay parts cleaning application. Our trained specialists are experts at providing parts cleaning solutions so you achieve the best possible result with your StingRay Parts Washer. Contact us about your parts cleaning detergent