Clamshell Parts Washer
The StingRay 84112 parts washer is designed to clean large diesel engine blocks, locomotive crankcases or other dirty large parts. StingRay Parts Washer offers a total aqueous cleaning solution for large industrial applications. The 84112 Clamshell industrial parts washer provides outstanding cleaning results through high wash power, high wash temperature, and its unique oscillating power wash manifold.
Standard Features & General Construction
- Green Technology: Closed Loop Zero Discharge
- Swing Door Retracting Turntable for Maximum Access
- Electronic Water Level Control & Refill
- Oscillating Wash Manifold to Maximize Cleaning
- Easy to Service Front Wash Pump Suction Strainer
- Adjustable Electronic Temp Control, Temp Gauge
- Control Transformer External of Panel minimizes Heat
- Programmable 24 Hour 7 Day Clock
- Low Water Shut-off Protects Pumps & Heating System
- Electronic Door Safety Interlock
- Wash Cycle Timer with Auto Reset
- Heavy gauge 1/4" Plate Steel Cabinet Thickness
- 230 V or 460 V - 60 Hz 3-Phase with 120 V Controls
- Chemical Resistant Two Part 3 mil Epoxy Coating
| Work Area Dimensions: |
US |
Metric |
| Turntable Diameter: |
84 inches |
2130 mm |
| Work Height: |
112 inches |
2840 mm |
|
Table Load Capacity:
|
15,000 lbs |
6800 kg |
| Heavy Duty Capacity: |
30,000 lbs |
13,600 kg |
| Overall Dimensions: |
US |
Metric |
| Width: (Std Unit) |
139 inches |
3530 mm |
| Depth: (Std Unit) |
132 inches |
3353 mm |
| Height: |
173 inches |
4394 mm |
| Empty Weight: |
26,500 lbs |
12,020 kg |
| Reservoir Capacity: |
850 gallons |
3218 liters |
| Quadroplex Reservoir: |
Add 90 gallons |
Add 340 liters |
| Sludge Capacity: |
135 gallons |
511 liters |
| Spray Blast Manifold: |
| OSCILLATING NON-SYNCHRONOUS Video |
| Angle of Oscillation: (Picture) |
40 Degrees |
| Frequency of Oscillation: |
4 per minute |
| Number of Wash Nozzles: (Picture) |
32 |
| Type of Nozzle: |
V-Jet |
| Nozzle Material: |
316 Stainless |
| Heating System: |
US |
Metric |
| Operating Temperature: |
140-190 degrees F |
60-88 degrees C |
| Electric Heat Element Size: (Picture)** |
120 kW |
120 kw |
| Gas / Propane (Picture) |
990,000 BTU/hr |
287 kW |
| Electrical Panel (Picture) |
US |
Metric |
| Motor Starters: |
Across the Line |
IEC Type 2 |
| Short Circuit Protection: |
Std |
Coordinated |
| Overload Protection: |
Std |
Thermal Class 10 |
| Electrical Enclosures: |
NEMA 12 |
IP65 |
| Wiring Standard: |
NFPA 79 |
NFPA 79 |
| Wiring Conduit: |
Flex-Non-Metallic |
Flex-Non-Metallic |
| Conduit Type: |
Liquidtight Nema 12 |
Liquidtight IP65 |
| Pump System & Performance: |
|
| Motor Type: (Picture) |
Energy-Efficient |
| Motor Rating: |
Continuous Duty |
| Motor Enclosures: |
TEFC |
High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller. Note: All performance data taken at nozzle discharge.
| STANDARD: |
70 hp (US) |
52 kW (Metric) |
| Total System Flow: |
502 gpm |
1900 l/min |
| Flow per Nozzle: |
15.7 gpm |
59 l/min |
| System Pressure: |
152 psi |
10.5 bar |
| Blast Velocity: |
156 ft/sec |
48 m/sec |
| Power Density: |
0.19 hp/ft³ |
4 kW/m³ |
| UPGRADES: (Quadroplex) |
140 hp (US) High Flow |
104 kW (Metric) High Flow |
140 hp (US) High Pressure |
104 kW (Metric) High Pressure |
| Total System Flow: |
1004 gpm |
3800 l/min |
860 gpm |
3250 l/min |
| Flow per Nozzle: |
15.7 gpm |
59 l/min |
19.9 gpm |
75 l/min |
| System Pressure: |
152 psi |
10.5 bar |
190 psi |
13.1 bar |
| Blast Velocity: |
156 ft/sec |
48 m/sec |
198 ft/sec |
60 m/sec |
| Power Density: |
0.39 hp/ft³ |
9 kW/m³ |
0.39 hp/ft³ |
9 kW/m³ |
Results may vary based on machine configuration.
** Heating element sizes listed for 208, 240 & 480 volt systems. Sizes vary slightly for other voltages.
